How to flash Samsung Stock ROM via Odin

Right now, I have shared bit by bit directions to flash Samsung Stock Rom using the Odin tool on Computer. There are numerous tools accessible to Flash Samsung cell phones. Be that as it may, the Odin tool is the best and simple to use tool to flash Samsung cell phones.

By adhering to the guidelines given beneath, you will have the option to take care of all the product issues identified with your Android device, for example, smashing of apps, bombed framework update, stuck at Samsung logo, and so forth

I have attempted to make the accompanying system is anything but difficult to follow, regardless of whether you are a novice or you have not flashed any android device before this. However, if you need assistance, our accomplished group will assist you in settling your issues for nothing. Don’t hesitate to leave us a remark underneath.

Also see: Download DFU Flash Tool v2.03 (All Versions)

Flash Samsung Stock ROM using Odin

1: Before starting flash stock firmware on your Samsung device, you’ll have to discover and download the right firmware for your Samsung device. Now and then finding the right firmware for Samsung devices can be difficult for apprentices. For more data, see a bit by bit manage on how to locate the official firmware of your Samsung device to stay away from any delicate block issues while flashing a device.

2: Download and Install the USB driver on your PC, and If you have just installed your device driver, then skirt this progression.

3: Download and extract the most recent form of the Odin Tool on your PC.

4: After separating Odin, right-click on the Odin3 v3.13.1.exe and run as administrator.

5: You need to boot your Samsung device into Download Mode.

To enter Download Mode, following theses are:

  • Turn off your Samsung phone.
  • For more seasoned Samsung phones: Press and hold “Power+Home+Volume down” buttons simultaneously. Discharge all the buttons when you get the Warning screen as screen capture given underneath.
  • For new Samsung Phones: Press and hold “Power+Bixby+Volume down” buttons simultaneously.
  • Press the Volume Up button to enter the Download Mode your phone.
  • Connect your phone to the PC using a USB link during in Download Mode.

6: Once you have connected your phone to the PC, Odin will perceive your device. You’ll have the option to see Added!!! A message on the left top corner of Odin Tool Window and a light-blue box underneath the ID: COM segment.

7: Open your downloaded firmware folder where you have removed your phone firmware and perceive what number files came in your firmware folder. Samsung cell phone firmware comes in two sorts single file firmware and four files firmware.

8: If you have single file firmware select the AP/PDA tab then peruse and choose a tar.md5 file from the removed firmware folder.

If you get four files firmware of your device, then select files one-by-one.

9: After choosing the files untick the “Auto Reboot” under the choices tab in the Odin Tool and afterward click on the Start button to start the flashing procedure.

Now, hang tight for certain minutes for Odin pass screen.

10: After the flashing procedure is done, you will see a green “RESET” or “PASSED” message in the Odin tool. It implies you have now effectively Flashed your Samsung device using the Odin Tool. Now unplug your device from the force and stand by some time as first boot takes 10-15 moments subsequent to flashing.

Add a Comment

Your email address will not be published. Required fields are marked *