How To Use Piranhabox Tool to Flash .Bin File on Android Devices

How To Use Piranhabox Tool: Some firmware bundles gave by device producers are disseminated in .bin extension and can’t be flashed or installed on the phone it is intended for, using the common firmware flashing tools like SP Flashtool, UpdateTool, and so forth.

Right now, I will be sharing a different manual for firmware flashing-.bin firmware files specifically. This guide can be used to flash many devices across different chipsets (Mediatek, Spreadtrum, and so on) and it works impeccably.

If you have downloaded a firmware bundle for your device and you find that its extension is .bin, cautiously follow the s right now flash the bundle.

Also see: Download PhoenixSuit v1.10 (Latest Version)

Download Piranhabox Tool:

Piranhabox Tool – Download

How To Use Piranhabox Tool

1: Extract the contents of the Piranhabox Tool file. Extricated content should resemble this:

2: Download the firmware bundle implied for your device in .bin extension. Concentrate the bin file from its file.

3: Run Piranha_Box.exe which has just been extricated in 1.

4: Once Piranhabox Tool is propelled, Click on Chinese Tool Button.

5: Under the Chinese Tools you should see MTK Chipset Tool (If your device is a mtk device). Then click on the Maximize button.

6 : From MTK Chipset Tool, select Write.

7: Click on Browse button and find the .bin firmware

8: Under Boot, select eighth Boot (mt65xx)

9: Select USB Mode button

10: Again, select Cable Name USB_(Cable&Mode)

11: Power off the device and connect it to your PC, then click Start to start the flashing procedure.

12: Once Flashing is finished, a Green Pass Status should show.

13: Now, disconnect the phone from PC.

Done! You’ve effectively flashed your device with its stock firmware. If you experience issues using this tool to flash any firmware, please post in the remarks section.

Add a Comment

Your email address will not be published. Required fields are marked *