How To Use Sp Flash Tool (Flash Stock and Custom ROMs)
Sp Flash Tool is the application that is given and created by MediaTek organization to improve the presentation of their processors. Meditek is a world well known IC planner for smartphones, tablets, customer products and some more.
Features Of Sp Flash Tool
- Working capacity on both Linux and Windows PC
- Quicker execution
- Capacity to flash both Stock and Custom ROMs
- Capacity to flash Custom recovery
- Checking and verifying the outer RAM memory
- Designing the device
What You Need To Use Sp Flash Tool
- Since Sp Flash Tool is a PC based utility programming you need a Windows
- Or then again a Linux PC (32 or 64-bit)
- Unique USB link of your device
- MediaTek USB-VCOM drivers Firmware file you are going to flash along with the scatter file
- A Scatter file contains the data of the device structure and the memory guide of the picture file. Since the sp flash tool is scatter based consistently check if the firmware file contains the disperse file.
Downloads:
Download SP Flash Tool Latest Version: Link | Mirror
Installing MediaTek USB-VCOM drivers on Windows PC
Now and then MediaTek drivers are not permitted to install on Windows PC. In the circumstance like that follow Disable mark verification authorization process
- Click Start > Settings>Update and security > Recovery
- Advanced Startup > Restart Now
- Troubleshoot > Advanced options> Start Up settings > Restart
- Then the PC will restart with the startup setting screen
- To Disable mark verification implementation until next restart
- press F7
- Subsequent to restarting the PC, you can go ahead with MediaTek
- USB-VCOM drivers
How To Flash Stock ROM Using Sp Flash Tool
- Download Sp Flash Tool and concentrate it
- Download Stock Firmware you wish to flash and concentrate it
- Switch off your device
- Now click “Flash_exe” to dispatch the Sp Flash Tool
- Click download tab and click the scatter stacking button to stack scatter file
- scatter file is situated in the firmware file
- Click on the “download symbol” to dispatch the flashing procedure
- Then connect your device and click volume up or down button to facilitate the PC to perceive the keen device
Sit tight for around 10 minutes, after an effective activity a message will be displayed alongside a green circle.
How To Flash Custom ROM Using Sp Flash Tool
- Download the applicable Custom ROM for you android MediaTek device
- Unfasten the folder
- Start your PC in “Device driver signature disabled” mode
- Install MediaTek USB-VCOM drivers
- Dispatch Sp Flash Tool in “Administrator Mode”
- Next, click “Scatter-loading” and load the scatter file that is situated in the firmware file
- Now select the “DownloadAgent” go to the Sp Flash Tool folder and
- select “MTK_AllInOne_DA.bin”
- After the above steps go to the”Format” tab and check the approval
- Now switch off your device and connect
- Then click start and to arrange the device
- Next, disconnect the device and click on the download button under the download tab
- Again connect the device
- Then the custom ROM installation will start and hang tight for around 10 minutes A green tick will appear after effective installation